ADJ MB DMX II User Instructions
Also see for MB DMX II: User manual
        | |
ADJ Products, LLC - www.adj.com - MB DMX II™ Instruction Manual Page 13MB DMX II DMX TraitsADJ Products, LLC - www.adj.com - MB DMX II™ Instruction Manual Page 14MB DMX II Dipswitch SettingsDipswitch Function SettingsDipswitches 1 ~ 8 Used to change the rotation speed duringStand-Alone or Master/Slave modeMaster Motor Speed ListSwitchSpeed DIP1 DIP2 DIP3 DIP4 DIP5 DIP6 DIP7 DIP8ONONONONONONONON- - - - - - -OFFOFFOFFOFFOFFOFFOFFOFF OFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFF OFFOFFOFF OFFOFFOFF------- - - - -- - - -- - -- --SPEED1 (0.5 rpm)SPEED8 (5rpm)SPEED2 (1 rpm)SPEED3 (1.5 rpm)SPEED4 (2 rpm)SPEED5 (2.5 rpm)SPEED6 (3 rpm)SPEED7 (4 rpm)Dipswitch 9 Control Rotation Direction;On = CW Rotation / Off = CCW RotationDipswitch 10 Controls Master/Slave Operation;On = Master / Off = SlaveNote: Dipswitch 10 must be in the off postion for DMX operation" - " = Dip Switch OffThe optional MINI/C may be used during Master/Slaveoperation to stop motor rotation and to blackout theelectrical socketsThe chart below details the DMX traits in depth. The individual traitcan only be accessed by using an universal DMX controller. Note:“Lamp” in channel 1 refers to the power socket located on the frontof the motor (this socket is intended to be used with lamps to light upthe mirror ball).The charts below details the Master/Slave setting for Master/Slaveconfiguration. Use this configuration when you will be using two ormore fixtures in a Master/Slave configuration. Note: The “Master” set-tings should only be used once at the first motor, using the “master”setting more than once in the chain may result in erratic operation. |
Related manuals for ADJ MB DMX II
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine