Command Reference Guide Global Configuration Mode Command Set61200510L1-35E Copyright © 2005 ADTRAN 338aaa group server [radius | tacacs+] Use the aaa group server command to group pre-defined RADIUS and TACACS+ servers into namedlists. For more detailed information on AAA functionality, refer to the Technology Review section of thecommand aaa on on page 340.Syntax Descriptionradius Groups defined RADIUS servers.tacacs+ Groups TACACS+ server.> Specifies the name of the list.Default ValuesNo default value necessary for this command.Applicable PlatformsThis command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 andTotal Access 900 Series units.Command HistoryRelease 5.1 Command was introduced.Release 11.1 TACACS+ server support was added.Functional NotesUse the radius-server command to specify RADIUS servers before adding them to a group. Likewise, usethe tacacs-server command to specify TACACS+ servers before adding them to a group. Thesecommands enter a mode for adding individual servers to the named group. Refer to Radius GroupCommand Set on page 1351 or TACACS+ Group Configuration Command Set on page 1363 for moreinformation.The default group cannot be changed and includes all RADIUS servers in the order they were specified bythe radius-server commands. The same is true of TACACS+ servers specified by the tacacs-servercommands.
