61200.130L1-1 FSU User Manual 1 9Chapter 3. OperationFSU MENU STRUCTUREThe opening menu is the access point to all other operations.The Main menu branches are Configuration, Statistics, Diagnos-tics, Save, Abort, and Logout. See Figure 3-2. Each Main menuitem has several functions and submenus to identify and accessspecific parameters.The Logout selection is available on the VT 100 interface only.In this chapter, the VT 100 selections are listed first followed by theFront Panel selections (if the names differ).Main MenuDefinitions for the branches of the Main menu follow:Configuration (CONFIG)Configuration is used to select network and DTE operatingparameters. For more information on configuration options, seethe following chapters: Configuration Overview, DTE Port Con-figuration, Configuring the Network Port, Configuring IP Routing,and System Configuration. When DTE Port 1 or 2 is selected, thePROTOCOL enabled determines the selections for PHYSICALLAYER OPTIONS, PROTOCOL OPTIONS, and PROTOCOLADDRESS TABLE.View Statistics (STATS)This selection displays statistical information for DTE ports, thenetwork port, the protocol, and the system. See the chapterStatistics for more information.Diagnostics (DIAG)Diagnostic options enable and disable loopback and pingfunctions. See the chapter Diagnostics for more information.