3 4 FSU User Manual 61200.130L1-1Chapter 5. Configuration OverviewThe FSU contains a default set of configuration options stored inread-only memory (see the appendix Default ConfigurationProfile). The unit is shipped from the factory with this profileloaded into the current (nonvolatile configuration) memory. Ifthis profile matches requirements for the system, then noadditional configuration is required to put the unit into service.If the profile does not match system requirements, it can bemodified. When the profile is modified, it is stored in thecurrent (nonvolatile configuration) memory. The FSU is thenconfigured with that profile every time power is turned on.For detailed information on configuration see the chapters DTEPort Configuration, Network Port Configuration, IP Routing, andSystem Configuration.Configuration menus are shown in Figures 5-2 (for the FrontPanel) and 5-3 (for the VT 100 terminal).Figure 5-1VT 100 Configuration Menu
