61200.130L1-1 FSU User Manual 7 9Chapter 8. IP RoutingIP Route TableUse these menu options to build a table of addresses for routingdata packets based on their IP address. When a packet with thespecified IP address is received, it is sent out through the se-lected port on the specified DLCI. See Figure 8-2.The IP route table can be used in conjunction with RIP protocolto provide routing paths for the entire IP network. If an IPpacket is received with a destination IP not located in the inter-nal routing table (static or RIP), then the gateway route is used.Figure 8-2IP Routing Table Menu
