ADTRAN 7310-8 Getting Started Manual

Also see for 7310-8: Quick start Quick start

© 2020, Amazon Web Services, Inc. or its affiliates. All rights reserved.3. Under Destination details, enter ProcessLoRa as the Destination name, and an appropriate description inthe Destination description – optional field.NOTE: The Destination name can be anything. For getting started and consistency, chooseProcessLoRa for the first integration with AWS IoT Core for LoRaWAN.4. Once the destination role is specified, begin configuring the destination rule by entering LoRaWANRoutingin the Rule name field. Ignore the Rules configuration – Optional section for now. The destination rulewill be fully configured later, as described in the “Hello World” sample application (refer to Creating theDestination Rule in the “Hello World” configuration section).5. Once you have specified the destination role and rule name, select Add Destination. The “Destinationadded” message will display, indicating that the destination has been successfully added.5.4.4 Registering the Endpoint DeviceOnce the endpoint device destination has been specified, you can begin the endpoint device registration processwith the AWS IoT Core for LoRaWAN by connecting to the AWS IoT console and following these steps:1. In the navigation pane, select Wireless connectivity, followed by Devices, and then finally select Addwireless device.2. In the Add device page, select the appropriate LoRaWAN specification version from the Wireless devicespecification drop-down menu.3. In the LoRaWAN specification and wireless device configuration menu, enter the DevEUI value in theappropriate field, and again in the Confirm DevEUI field to confirm it.4. Complete the remaining fields as per the OTAA/ABP choice for your device (as defined in 5.4.1Preparation). Be sure to enter a name for your device in the Wireless device name – optional field.5. Navigate to the Profiles section (under Wireless device profile), select the appropriate profile from thedrop-down menu, and select Next. The selected profile should correspond to your device and region.NOTE: Compare your device details to the profile to ensure the device profile is correct. If there are novalid default options, you will have to create a new profile (as detailed in 5.4.2 Verifying Endpoint Deviceand Service Profiles).6. Next, select the previously created destination for the endpoint device (ProcessLoRa) from the Choosedestination drop-down menu and select Add device. A “Wireless device added” message will display,indicating that your endpoint device has been successfully registered to the AWS IoT Core.6. Configuring the ADTRAN 7310-8 LoRaWAN GatewayThe following sections detail the processes for installing the ADTRAN 7310-8 LoRaWAN gateway hardware andsoftware. Additional information for both processes is available online in the ADTRAN 7310-8 Quick Start Guide.6.1 ADTRAN 7310-8 Hardware InstallationThe hardware installation process for the ADTRAN 7310-8 gateway includes the following:• Installing the Antenna• Mounting the 7310-8 LoRaWAN Gateway• Supplying Power to the 7310-8 LoRaWAN Gateway• Connecting to the LoRaWAN Gateway• Configuring the LoRaWAN Gateway• Understanding the 7310-8 Status LEDs6.1.1 Installing the AntennaTo install the provided antenna onto the LoRaWAN gateway, attach the external antenna onto the antenna port onthe left side of the gateway as shown in the ADTRAN 7310-8 Quick Start Guide.6.1.2 Mounting the 7310-8 LoRaWAN GatewayThe 7310-8 LoRaWAN gateway can be mounted to a ceiling, wall, or dropped ceiling. To mount the gateway in oneof these configurations, follow the instructions provided in the ADTRAN 7310-8 Quick Start Guide. When mounting