ADTRAN 7310-8 Getting Started Manual

Also see for 7310-8: Quick start Quick start

© 2020, Amazon Web Services, Inc. or its affiliates. All rights reserved.6.3 Additional Software ReferencesPlease browse the ADTRAN Support Community for available technical documentation.6.4 Configuring the ADTRAN 7310-8 Gateway for AWSTo configure the ADTRAN 7310-8 gateway for use with AWS, you will need to upload the CUPS certifications to thegateway and then provision and start the gateway’s packet forwarding program for communication with AWS. Thesteps required to complete these configurations are provided in the following sections.6.4.1 Uploading CUPS Certifications to the 7310-8 GatewayThe first step in provisioning the ADTRAN 7310-8 gateway for use with AWS is to upload the configured CUPScertifications to the gateway. To upload the CUPS certificates, follow these steps:1. Acquire the 7310-8 gateway IP address through either the ADTRAN IoT app or another process.2. Enter the gateway IP address in a web browser, and be sure to specify port 5000 is used. Enter the IPaddress and port in the following format: X.X.X.X:xxxx; for example, 10.0.0.248:5000.3. Upload the 4 CUPS certificates created in Adding an IAM Role for CUPS Server.4. Enter the gateway’s 5-digit PIN (last 5 digits of the device’s serial number).5. Select Submit to upload the certificates to the gateway.6.4.2 Provisioning and Starting the Packet Forwarding Program