Unit Installation NetVanta 3200/3300/3400 Series70 Copyright © 2012 ADTRAN, Inc. 61200860L1-34ABPowering the NetVanta 3205 (AC), NetVanta 3305, NetVanta 3430, NetVanta 3448,NetVanta 3450, and NetVanta 3458The AC-powered NetVanta 3205, NetVanta 3305, NetVanta 3430, NetVanta 3448, NetVanta 3450, andNetVanta 3458 come equipped with an auto-sensing 100 to 250 VAC, 50/60 Hz power supply forconnecting to the proper power receptacle. A grounded, three-plug detachable cable is included with theshipment.Powering the NetVanta with Octal PoE UpgradeThe NetVanta PoE Power Supply is an auto-sensing 100 to 250 VAC, 50/60 Hz power supply forconnecting to the proper power receptacle. This power supply is only available with the Octal PoEUpgrade bundle for the NetVanta 3448 and the NetVanta 3458, which include the power supply and theOctal PoE module. A grounded, three-plug detachable cable is included with the shipment.• This unit shall be installed in accordance with Articles 300 and 400 of NEC NFPA 70.• Power to the AC system must be from a grounded 100 to 250 VAC, 50/60 Hz source.• Maximum recommended ambient operating temperature is 50o C.• This unit shall be installed in accordance with Articles 300 and 400 of NEC NFPA 70.• Power to the AC system must be from a grounded 100 to 250 VAC, 50/60 Hz source.• Maximum recommended ambient operating temperature is 50o C.The NetVanta PoE Power Supply is intended• to supply up to 8 PoE ports at 48 VDC, 15.4 watts per port.• to be installed, maintained, and serviced by qualified service personnel only.• for use only with NetVanta units with the Octal PoE Upgrade module installed.Before powering your NetVanta with the PoE Power Supply, the Octal PoE Upgrademodule must first be installed. Refer to Installing the Octal PoE Upgrade Module onpage 81 for more information.The NetVanta PoE Power Supply should be installed in a restricted access locationas described in UL 60950-1.Under full load, the NetVanta PoE Power Supply may be hot to the touch.
