ADTRAN NetVanta 7000 Series Hardware Installation Manual
Also see for NetVanta 7000 Series: Manual Release notesRelease notesConfiguration and troubleshooting guideHardware installation guide
                                                        | |
Contents
| 
Option Modules NetVanta 7000 Series Hardware Installation Guide61200796L1-34D Copyright © 2006 ADTRAN, Inc. 34NetVanta ADSL NIM, Annex A (P/N 1200869E1/L1)The NetVanta ADSL NIM Annex A (see Figure 12) adds ADSL capability to the NetVanta 7100. Themodule provides a single ADSL, ADSL2, or ADSL2+ network interface to support rates up to 25 Mbps.See Table A-12 on page 52 for the pinouts. The ADSL NIM supports an optional DIM for dial backupapplications. See Table A-14 on page 54 for the DBU connector pinouts.Figure 12. NetVanta ADSL NIM, Annex AWAN-ADSL DBUFeatures and SpecificationsADSL Interface• ADSL over POTS, Annex A• Supported Standards:– ITU G.992.1 (G.dmt)– ITU G.992.2 (G.lite)– ITU G.992.3 ADSL2 (G.dmt.bis)– ITU G.992.5 ADSL2+– ANSI T1.413 Issue 2– Reach Extended ADSL (READSL2)• Connector: RJ-1C (6-pin jack, inner pair)ATM• Multiple Protocol over AAL5 (RFC2684)• PPP over ATM (RFC2364)• PPP over Ethernet (RFC2516)• ATM Forum UNI 3.1/4.0 PVC• ATM Class of Service (UBR)• ATM F5 OAM• Up to 16 Virtual CircuitsCompliance• EMC - see ElectromagneticCompatibility (EMC) Table for theNetVanta 7100 on page 6• ACTA/FCC Part 68• AS/ACIF S043• AS/ACIF S002• IC CS-03• EN 60950• IEC 60950• UL/CUL 60950• AS/NZS 60950• RoHS Compliant (1200869E1 only)(Telecommunications exemption)Environmental• Operating temperature: 0°C to 50°C• Storage Temperature: -20°C to 70°C• Relative Humidity: Up to 95 percent,noncondensingPhysical• Dimensions: 2.75-inch W x 4.25-inch D |
Related manuals for ADTRAN NetVanta 7000 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine