ADTRAN NetVanta 7000 Series Hardware Installation Manual
Also see for NetVanta 7000 Series: Manual Release notesRelease notesConfiguration and troubleshooting guideHardware installation guide
                                                        | |
Contents
| 
Unit Installation NetVanta 7000 Series Hardware Installation Guide61200796L1-34D Copyright © 2006 ADTRAN, Inc. 48Figure 20. NIM/VIM and DIM InstallationYour NetVanta 7100 is now ready to be configured and connected to the network. For more information onconfiguration for a specific application, refer to the quick configuration documents provided on yourADTRAN OS System Documentation CD. For details on the command line interface, refer to the CommandReference Guide (also included on your CD).Instructions for Installing the NIMs and VIMsStep Action1 Remove power from the unit.2 Slide the option module into the option slot until the module is firmly seated against the chassis.3 Secure the pins at both edges of the module.4 Connect the cables to the associated device(s).5 Restore power to the unit.All unused NIM/VIM slots on the back panel of the unit must be covered with the suppliedcover plates.CFSLOT 1 NIM/VIM SLOT 2 NIM/VIM STATIONS TRUNKSANALOGFXS FXO0/1 0/2 0/1 0/2MOHNO NC COMETH 0/0 CONSOLE DOORRELAY100-250 VAC 50-60HzPAGE |
Related manuals for ADTRAN NetVanta 7000 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine