ADTRAN NetVanta 7000 Series Hardware Installation Manual
Also see for NetVanta 7000 Series: Manual Release notesRelease notesConfiguration and troubleshooting guideHardware installation guide
                                                        | |
Contents
| 
Option Modules NetVanta 7000 Series Hardware Installation Guide61200796L1-34D Copyright © 2006 ADTRAN, Inc. 36NetVanta T1/PRI VIM, (P/N 1200695L1)The NetVanta T1/PRI VIM (see Figure 14) adds T1 voice capability to the NetVanta 7100. Refer toTable A-7 on page 51 for the T1 connector pinouts.Figure 14. NetVanta T1/PRI VIMFeatures and SpecificationsOperating Modes• Primary Rate ISDN (PRI), CAST1 Interface• Supported Standards: AT&T TR 62411,AT&T TR54016, Bellcore TR 194,ANSI T1.403• Line Rate: 1.544 Mbps +75 bps• Line Code: AMI or B8ZS• Framing: D4 (SF) or ESF• FT1 Line Rate: DS0 channelized(multiples of 64 kbps)• Input Signal: 0 to -36 dB (DS1)• Line Build-Out: 0, -7.5, -15, -22.5 dB(long), 0 to 655 ft (short)• DS0 Assignment: Programmable• Connector: RJ-48CClock Source• Line• InternalDiagnostics• Test Pattern Generation and Detection:QRSS, 215 - 1, all ones, all zeros• Network loopbacks (local and remote);responds to both inband and FDL loopcodes• Alarm generation detection• Network performance data (15 minutesand 24 hours)Compliance• FCC Part 15 Class A, EN 55022 Class A• ACTA/FCC Part 68• IC CS-03• UL/CUL 60950Environmental• Operating temperature: 0°C to 50°C• Storage Temperature: -20°C to 70°C• Relative Humidity: Up to 95 percent,noncondensingPhysical• Dimensions: 2.75-inch W x 4.25-inch D |
Related manuals for ADTRAN NetVanta 7000 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine