ADTRAN T200 IDSL Installation And Maintenance Manual

Contents

ADTRAN T200 IDSL Installation And Maintenance Manual Manual pdf 9 page image

961220010L2-5, Issue 361220010L2-5CTo conduct a terminal session, connect a VT100 orcompatible test set to the OCU-R via the front panelDB-9 connector, then press the space bar three timesto initiate the session. The Main Menu will appear,as illustrated in Figure 9.The Main Menu provides access to detailedperformance and configuration information.A Terminal Modes Menu is available for configuringthe craft interface for a manual terminal update or areal-time terminal update. Figure 10 shows theTerminal Modes Menu.NOTEReal-time terminal update is recommended fornormal terminal operation unless screens are tobe captured or logged to a print file.Figure 9. Main Menu ScreenCIRCUIT ID:IDSL Test Unit 07/25/00 02:14:40Adtran IDSL Main Menu1. Status2. Loopbacks3. Performance Monitoring4. Event Log5. Set Circuit ID6. Set Date and Time7. Adtran Information8. Terminal ModesSelection:Figure 10. Terminal Modes Menu ScreenCIRCUIT ID:IDSL Test Unit 07/25/00 02:39:56TERMINAL MODES MENUMANUAL UPDATE MODE:* You can print or log screens* No text is highlighted* “Ctrl+R to Update” appears at the top of each screen, remindingyou to press both the ‘Ctrl’ and ‘R’ keys to update the screen* There is a delay between screen changes & updates* After 30 min. of no interaction, a new baud rate search is begun* Ignores input until screen is finished printingREAL-TIME UPDATE MODE:* Faster of the two modes* You cannot print screens to a log file* Highlighting is enabled* Recommended for daily operationPress to toggle update modes