Chapter 4. Status4-4 T3SU 300 User Manual 61200217L1-1DTE PORTSThe following status information is available for DTE Ports 1-4.Interface TypeThe interface type of the port is shown in this field (HSSI, V.35, orQuad DSX-1).Port StatusThis field displays the current port status. Possible states are listedin the following chart:Eqpt Fail (NSA) The network has signaled a non-service affectingequipment failure condition.Com Eqpt Fail(NSA)The network has signaled a non-service affectingcommon equipment failure condition.Unknown The T3SU 300 is unable to determine the state of thenetwork or the remote unit.Condition DescriptionCondition DescriptionInactive The port is installed, but idle. Activate a port through thePORT S TATE field of the DTE PORT C ONFIGURATIONmenu.Active The port has been configured and is passing data.Error An error condition such as loss of transmit clock hasoccurred.In Test The unit is currently in test mode.
