AEG 47056VS User Manual

Also see for 47056VS: User manual User manual

AEG 47056VS User Manual Manual pdf 32 page image

INSTALLATIONWARNING!Refer to "Safety information"chapter.TECHNICAL DATADimensionsHeight 847 - 867 mmWidth 596 mmDepth 600 mmOven capacity 74 lVoltage 230 VFrequency 50 HzLOCATION OF THEAPPLIANCEYou can install your freestanding appli-ance with cabinets on one or two sidesand in the corner.AABMinimum distancesDimen-sionmmA 2B 685LEVELLINGUse small feet on the bottom of applianceto set the appliance top surface level withother surfaces.ANTI-TILT PROTECTIONCAUTION!You must install the anti-tilt pro-tection. If you do not install it, theappliance can tilt.Make sure you install the anti-tiltprotection at the correct height.1. Set the correct height and area forthe appliance before you attach theanti-tilt protection.2. Install the anti-tilt protection 77 mmdown from the top surface of the ap-pliance and 49 mm from the left sideof the appliance into the circular holeon a bracket (see fig.). Screw it intothe solid material or use applicablereinforcement (wall).3. You can find the hole on the left sideon the back of the appliance (seefig.).Lift the front of the appliance (1) andput it in the middle of the space be-tween the cupboards (2). If the spacebetween the bench cupboards is larg-er than the width of the appliance,you must adjust the side measure-ment to centre the appliance.Make sure that the surface behind theappliance is smooth.32 www.aeg.com