AEG BP5304001 User Manual

Also see for BP5304001: User manual

Problem Possible cause SolutionThe display shows C2 You want to start the pyrolyticcleaning or defrost functionbut you did not remove foodsensor plug from the socket.Remove the food sensor plugfrom the socketThe display shows F2 • The door is not closed cor-rectly• The door lock is defect• Close the door correctly• Switch off the appliancewith the house fuse or thesafety switch in the fuse boxand switch it on again• If the display shows F2 again,refer to the Customer CareDepartmentThe display shows an error codethat is not in this listThere is an electronic fault • Switch off the appliancewith the house fuse or thesafety switch in the fuse boxand switch it on again• If the display shows the errorcode again, refer to the Cus-tomer Care DepartmentIf you cannot find a solution to the problem yourself, contact your dealer or the servicecentre.The necessary data for the service centre is on the rating plate. The rating plate is on thefront frame of the oven cavity.We recommend that you write the data here:Model (MOD.) .........................................Product number (PNC) .........................................Serial number (S.N.) .........................................INSTALLATIONWARNING!Refer to "Safety information" chapter.The built-in unit must meet the stability requirements of DIN 68930.Installation 29