5. Set the oven function and, if neces-sary, the oven temperature.The appliance calculates an approxi-mate end time. The end time is dif-ferent for different quantities offood, the set oven temperature (min-imum 120 °C) and the operatingmode. The appliance calculates theend time in approximately 30 mi-nutes.6. Make sure that the core temperaturesensor stays in the meat and in thecore temperature sensor socket dur-ing the cooking.7. If necessary, you can set a new coretemperature during the cooking. Todo this, touch .8. When the meat is at the set coretemperature, an acoustic signalsounds. The appliance deactivatesautomatically.Touch a sensor field to stop the sig-nal.9. Remove the core temperature sen-sor plug from the socket . Removethe meat from the appliance.WARNING!The core temperature sensor ishot. There is a risk of burns. Becareful when you remove the tipand plug of the core tempera-ture sensor.9.3 Telescopic runners°C1. Pull out the right and left hand tele-scopic runners.°C2. Put the wire shelf on the telescopicrunners and carefully push them intothe appliance.Make sure you push back the tele-scopic runners fully in the appliancebefore you close the oven door.Keep the installation instructionsfor the telescopic runners for fu-ture use.With telescopic runners you can put inand remove the shelves more easily.CAUTION!Do not clean the telescopic run-ners in the dishwasher. Do not lu-bricate the telescopic runners.16 www.aeg.com