7. CLOCK FUNCTIONSSymbol Function DescriptionMinute MinderTo set a countdown (max. 2 h 30 min). This func-tion has no effect on the operation of the appli-ance. You can also activate it when the applianceis deactivated. Press to activate the function.Use the shuttle to set the minutes and OK to start.Duration To set the length of an operation (max. 23 h 59min).End Time To set the switch-off time for a heating function(max. 23 h 59 min).If you set the time for a clock function,the time starts to count down after 5 sec-onds.If you use the clock functions Du-ration and End Time , the appli-ance deactivates the heating ele-ments after 90 % of the set time.The appliance uses the residualheat to continue the cookingprocedure until the time ends.The residual heat can stay in theappliance from 3 to 20 minutes.Setting the clock functions1. Set a heating function.2. Press again and again until thedisplay shows the necessary clockfunction and the related symbol.3. Use the shuttle to set the necessarytime. Press OK to confirm. When thetime ends, an acoustic signalsounds. The appliance deactivates.The display shows a message.4. Press a sensor field to stop the sig-nal.Useful information:• With Duration and End Time , youmust set the heating function and thetemperature first. Then you can set theclock function. The appliance deacti-vates automatically.• You can use Duration and End Time atthe same time if you want to automati-cally activate and deactivate the appli-ance at a given time later.• When you use the Core TemperatureSensor (if applicable), the Durationand End Time functions do not oper-ate.7.1 Heat + HoldThe Heat + Hold function keeps pre-pared food warm at 80 °C for 30 mi-nutes. It activates after the baking orroasting procedure ends.• You can activate or deactivate thefunction in the Basic Settings menu.• Conditions for the function:– The set temperature is more than 80°C.– The function Duration is set.Activating the function1. Activate the appliance.2. Select the heating function.3. Set the temperature above 80 °C.4. Press again and again until thedisplay shows Heat + Hold . PressOK to confirm.When the function ends, an acoustic sig-nal sounds.The Heat + Hold function stays on if youchange the heating functions.7.2 Extra TimeThe Extra Time makes the heating func-tion continue after the Duration ends.• Applicable for all heating functionswith Duration or Weight Automatic .• Not applicable for heating functionswith the core temperature sensor.14 www.aeg.com