Do not use steel wool, acids or abrasivematerials as they can damage the ovensurface. Clean the oven control panelwith the same precautions.11.3 Removing the shelfsupportsTo clean the oven, remove the shelfsupports.1. Pull the front of the shelf supportaway from the side wall.2. Pull the rear end of the shelf supportaway from the side wall and removeit.21The retaining pins on thetelescopic runners mustpoint to the front.Install the shelf supports in the oppositesequence.CAUTION!Make sure that the longerfixing wire is in the front. Theends of the two wires mustpoint to the rear. Incorrectinstallation can causedamage to the enamel.11.4 Removing the oven doorTo make the cleaning easier, remove thedoor.121. Open the door fully.2. Move the slider until you hear a click.3. Close the door until the slider locks.4. Remove the door.To remove the door, pull the dooroutwards first from one side, andthen the other.When the cleaning procedure iscompleted, insert the oven door in theopposite sequence. Make sure that youhear a click when you insert the door.Use force if necessary.11.5 Removing and cleaningthe door glassesThe door glass in yourproduct can be different intype and shape from theexamples you see in theimages. The number ofglasses can also be different.1. Hold the door trim B on the topedge of the door at the two sidesand push inwards to release the clipseal.12B2. Pull the door trim to the front toremove it.www.aeg.com28