To change the time of day pressagain and again until the indicator for thetime of day flashes in the display.7.3 Setting the DURATIONfunction1. Set a heating function.2. Press again and again untilstarts to flash.3. Press or to set the minutes andthen the hours. Press to confirm.When the set Duration time ends thesignal sounds for 2 minutes. and timesetting flash in the display. The oventurns off automatically.4. Press any button or open the ovendoor to stop the signal.5. Turn the knob for the heatingfunctions to the off position.7.4 Setting the END function1. Set a heating function.2. Press again and again untilstarts to flash.3. Press or to set the hours andthen the minutes. Press toconfirm.At the set End time the signal sounds for2 minutes. and time setting flash inthe display. The oven turns offautomatically.4. Press any button or open the ovendoor to stop the signal.5. Turn the knob for the heatingfunctions to the off position.7.5 Setting the TIME DELAYfunction1. Set a heating function.2. Press again and again untilstarts to flash.3. Press or to set the minutes andthen the hours for DURATION time.Press to confirm.The display shows flashing .4. Press or to set the hours andthen the minutes for END time. Pressto confirm. The display showsand the set temperature.Oven turns on automatically later on,works for the set DURATION time andstops at the set END time.At the set END time the signal soundsfor 2 minutes. and time setting flashin the display. The oven turns off.5. Press any button or open the ovendoor to stop the signal.6. Turn the knob for the heatingfunctions to the off position.7.6 Setting the MINUTEMINDERMinute minder can be both set when theoven is turned on and off.1. Press again and again untilstarts to flash.2. Press or to set the secondsand than the minutes.When the time you set is longer than60 minutes, flash in the display.3. Set the hours.4. The MINUTE MINDER startsautomatically after 5 seconds.After 90% of the set time the signalsounds.5. When the set time ends the signalsounds for 2 minutes. "00:00" andflash in the display. Press anybutton to stop the signal.7.7 COUNT UP TIMERTo reset the Count Up Timer, press andhold and . The timer starts to countup again.www.aeg.com12