AEG EPB331020M User Manual

Also see for EPB331000M: User manual User manual User manual

Contents

WARNING!Make sure that the glassesare inserted in the correctposition otherwise thesurface of the door mayoverheat.Make sure that you put the glass panels(C, B and A) back in the correctsequence. First, insert panel C, which hasa square printed on the left side and atriangle on the right side. You will alsofind those symbols embossed on thedoor frame. The triangle symbol on theglass must match the triangle on thedoor frame, and the square symbol mustmatch the square. After that insert theother two glass panels.A B C11.6 Replacing the lampWARNING!Risk of electric shock.The lamp can be hot.1. Turn off the oven.Wait until the oven is cooled down.2. Disconnect the oven from the mains.3. Put a cloth on the bottom of thecavity.The top lamp1. Turn the lamp glass cover to removeit.2. Clean the glass cover.3. Replace the lamp with a suitable 300°C heat-resistant lamp.4. Install the glass cover.12. TROUBLESHOOTINGWARNING!Refer to Safety chapters.12.1 What to do if...Problem Possible cause RemedyThe cooking zones do notoperate.Refer to the operating instructions for the built-in cookingsurface.ENGLISH 33