AEG HG654351SM User Manual

• Keep the minimum distance fromother appliances and units.• Always take care when moving theappliance as it is heavy. Always usesafety gloves and enclosed footwear.• Seal the cut surfaces with a sealant toprevent moisture to cause swelling.• Protect the bottom of the appliancefrom steam and moisture.• Do not install the appliance adjacentto a door or under a window. Thisprevents hot cookware falling fromthe appliance when the door or thewindow is opened.• If the appliance is installed abovedrawers make sure that the space,between the bottom of the applianceand the upper drawer, is sufficient forair circulation.• The underside of the appliance canget hot when in use. If an oven hasnot been fitted underneath the hoband underside of the appliance isaccessible and could allow a user oritems stored beneath the hob tocome in direct contact with theunderside of the hob, an intermediateprotection panel must be fitted.• Plywood or kitchen carcass material isacceptable for the panel.• The panel must be removable forservicing. Screws used to fix the panelmust be accessible after installation.2.2 Electrical ConnectionWARNING!Risk of fire and electricshock.• All electrical connections should bemade by a qualified electrician.• The appliance must be earthed.• Before carrying out any operationmake sure that the appliance isdisconnected from the power supply.• Make sure that the parameters on therating plate are compatible with theelectrical ratings of the mains powersupply.• Make sure the appliance is installedcorrectly. Loose and incorrectelectricity mains cable or plug (ifapplicable) can make the terminalbecome too hot.• Use the correct electricity mainscable.• Do not let the electricity mains cabletangle.• Make sure that a shock protection isinstalled.• Use the strain relief clamp on thecable.• Make sure the mains cable or plug (ifapplicable) does not touch the hotappliance or hot cookware, when youconnect the appliance to the nearsockets.• Do not use multi-plug adapters andextension cables.• Make sure not to cause damage tothe mains plug (if applicable) or to themains cable. Contact our AuthorisedService Centre or an electrician tochange a damaged mains cable.• The shock protection of live andinsulated parts must be fastened insuch a way that it cannot be removedwithout tools.• Connect the mains plug to the mainssocket only at the end of theinstallation. Make sure that there isaccess to the mains plug after theinstallation.• If the mains socket is loose, do notconnect the mains plug.• Do not pull the mains cable todisconnect the appliance. Always pullthe mains plug.• Use only correct isolation devices: lineprotecting cut-outs, fuses (screw typefuses removed from the holder), earthleakage trips and contactors.• The electrical installation must havean isolation device which lets youdisconnect the appliance from themains at all poles. The isolationdevice must have a contact openingwidth of minimum 3 mm.2.3 Gas connection• All gas connections should be madeby a qualified person.• Before installation, make sure that thelocal distribution conditions (nature ofthe gas and gas pressure) and theadjustment of the appliance arecompatible.• Make sure that there is air circulationaround the appliance.ENGLISH 5