AEG HK633220FB User Manual

Also see for HK633220FB: User manual

WARNING!Risk of injury from electrical current. Carefully obey the instructions for electrical connec-tions.• The electrical mains terminal is live.• Make electrical mains terminal free of voltage.• Install correctly to give shock protection.• Loose and incorrect plug and socket connections can make the terminal become too hot.• A qualified electrician must install the connections in the clamps correctly.• Use a strain relief clamp on cable.• Use the correct mains cable of type H05BB-F Tmax 90°C (or higher) for a single phase ortwo phase connection.• Replace the damaged mains cable with a special cable (type H05BB-F Tmax 90°C; orhigher). Speak to your local Service Centre.The appliance must have the electrical installation which lets you disconnect the appliancefrom the mains at all poles with a contact opening width of minimum 3 mm.You must have correct devices to isolate: line protecting cut-outs, fuses (screw type fusesremoved from the holder), earth leakage trips and contactors.Assemblymin.50mmmin.50mmmin.500mmmin.5mm= =490+1mm 560+1mm600mmR 5mmInstallation instructions 21