7. TROUBLESHOOTINGWARNING!Refer to Safety chapters.7.1 What to do if...Problem Possible cause RemedyYou cannot activate or oper-ate the hob.The hob is not connected toan electrical supply or it isconnected incorrectly.Check if the hob is correctlyconnected to the electricalsupply. Refer to the connec-tion diagram.The fuse is released. Make sure that the fuse isthe cause of the malfunction.If the fuse releases againand again, contact a quali-fied electrician.Activate the hob again andset the heat setting in lessthan 10 seconds.You touched 2 or more sen-sor fields at the same time.Touch only one sensor field.STOP+GO function oper-ates.Refer to "Daily use" chapter.There is water or fat stainson the control panel.Clean the control panel.An acoustic signal soundsand the hob deactivates.An acoustic signal soundswhen the hob is deactivated.You put something on oneor more sensor fields.Remove the object from thesensor fields.The hob deactivates. You put something on thesensor field .Remove the object from thesensor field.Residual heat indicator doesnot come on.The zone is not hot becauseit operated only for a shorttime.If the zone operated suffi-ciently long to be hot, speakto an Authorised ServiceCentre.Automatic Heat Up functiondoes not operate.The zone is hot. Let the zone become suffi-ciently cool.The highest heat setting isset.The highest heat setting hasthe same power as the func-tion.You cannot activate the out-er ring.Activate the inner ring first.www.aeg.com12