remaining time counts down to 00. Theindicator of the cooking zone disappears.When the countdown ends, anacoustic signal sounds and 00flashes. The cooking zonedeactivates.To stop the sound: touch .• CountUp TimerYou can use this function to monitor howlong the cooking zone operates.To set the cooking zone: touchrepeatedly until the indicator of a cookingzone appears.To activate the function: touch of thetimer. appears. When the indicator of thecooking zone starts to flash, the time countsup. The display switches between and thecounted time (in minutes).To see how long the cooking zoneoperates: touch to set the cooking zone.The indicator of the cooking zone starts toflash. The display shows how long the zoneoperates.To deactivate the function: touch andthen touch or . The indicator of thecooking zone disappears.• Minute MinderYou can use this function when the hob isactivated and the cooking zones do notoperate. The heat setting display shows .To activate the function: touch and thentouch or of the timer to set the time.When the time finishes, an acoustic signalsounds and 00 flashes.To stop the sound: touch .The function has no effect on theoperation of the cooking zones.5.7 STOP+GOThis function sets all cooking zones thatoperate to the lowest heat setting.When the function operates, you cannotchange the heat setting.The function does not stop the timerfunctions.To activate the function: touch .comes on.To deactivate the function: touch . Theprevious heat setting comes on.5.8 LockYou can lock the control panel while cookingzones operate. It prevents an accidentalchange of the heat setting.Set the heat setting first.To activate the function: touch .comes on for 4 seconds. The Timer stays on.To deactivate the function: touch . Theprevious heat setting comes on.When you deactivate the hob,you also deactivate this function.5.9 Child Safety DeviceThis function prevents an accidentaloperation of the hob.To activate the function: activate the hobwith . Do not set any heat setting. Touchfor 4 seconds. comes on. Deactivatethe hob with .To deactivate the function: activate the hobwith . Do not set any heat setting. Touchfor 4 seconds. comes on. Deactivatethe hob with .To override the function for only onecooking time: activate the hob with .comes on. Touch for 4 seconds. Set theheat setting in 10 seconds. You canoperate the hob. When you deactivate thehob with the function operates again.5.10 OffSound Control(Deactivating and activating thesounds)Deactivate the hob. Touch for 3 seconds.The display comes on and goes out. Touchfor 3 seconds. or comes on. Touch26 ENGLISH