General instruction:• If you set a clock function, the symbol flashes for approximately 5 seconds. In these 5seconds, touch or to set the time.• If you set the time, the symbol continues to flash for approximately 5 seconds. Afterthese 5 seconds, the symbol comes on. The time starts to count down for Minute mind-er. For Duration and End the time starts to count down after the function starts.• If you want to delay the start of the cooking time use End function .• If you want to end cooking earlier (before end of clock functions) use .AUTOMATIC PROGRAMMESWARNING!Refer to "Safety information" chapter.Automatic ProgrammesFor an automatic programme, refer to the recipes in "Automatic programmes".Setting a programme1. If it is necessary, touch to deactivate the appliance.2. Touch to access the automatic programmes menu.3. Touch or to set an automatic programme (P1 to P12).– The display shows the automatic weight " gr " and flashing duration symbol .– Touch or to set the weight of the food from 100 g to 1500 g (P5 to P12maximum 1000 g).– When you change the weight, the Microwave duration time changes automatically.Always set the lower weight. For example, if bread weight is 460 g, set 400 g.4. Touch to activate the programme.When the set time ends, an acoustic signal sounds for 2 minutes. The symbol flashes.The appliance stops automatically. Touch a control to stop the acoustic signal.With some programmes, after the end of Microwave duration function, the Keep Warmfunction activates automatically. An acoustic signal sounds and the display shows "HH".Memory functionUse the Memory function to save one favourite setting.1. Set the oven function, temperature and the clock functions: Duration and/or End.2. Touch and hold for 2 seconds until an acoustic signal sounds. The setting is con-firmed.Activating the Memory function1. If it is necessary, touch to deactivate the appliance.2. Touch to set the saved setting.16 Automatic programmes