3. Use or to set an automatic programme (P1 to P12).– The symbol for the function comes on in the display.– The cooking time and come on in the display.– Touch the clock control . Then, touch the or control to set the cookingtime.– The oven activates automatically after approximately 5 seconds.When set time ends, an acoustic signal sounds for 2 minutes. flashes. The oven stopsautomatically. Touch a control to stop the acoustic signal.Memory functionUse the Memory function to save one favourite setting.1. Set the oven function, temperature, and the clock functions: Duration and/or End.2. Touch and hold the sensor field for Automatic programmes for approximately 2 sec-onds until an acoustic signal sounds. The setting is saved.Activating the Memory function1. Activate the appliance.2. Touch to set the saved setting.USING THE ACCESSORIESWARNING!Refer to "Safety information" chapter.Installing the oven accessoriesAll oven accessories have a small indentation at the bottom on the right and left edge toincrease the safety.Always make sure that this indentation is at the rear of the oven. This indentation is also ananti-tip device.Baking tray:Push the baking tray between the guide bars ofthe oven level.14 Using the accessories