AEG KS8100001M User Manual
Also see for KS8100001M: User manual
                                               | |
Contents
| 
ELECTRICAL CONNECTIONWARNING!Refer to "Safety information" chapter.The oven is designed to be connected to 230-240V~(50Hz) electricity supply.The oven has an easily accessible terminal block which is marked as follows:Letter L - Live terminalLetter N - Neutral terminal- Earth terminalCAUTION!This oven must be earthed!The cable used to connect the oven to the electrical supply must comply to the specifica-tions given below.For UK use onlyConnection via Min. size Cable/flex Cable/flex type FuseCooker Control Circuit 2,5 mm² PVC/PVC twin andearthmin: 15 Amax: 20 AIt is necessary that you install a double pole switch between the oven and the electricitysupply (mains), with a minimum gap of 3 mm between the switch contacts and of a typesuitable for the required load in compliance with the current regulations.The switch must not break the yellow and green earth cable at any point.After installation and connecting, the cable must be placed so that it cannot at any pointreach a temperature of more than 50°C above the ambient temperature.Before the oven is connected, check that the main fuse and the domestic installation cansupport the load; and that the power supply is properly earthed.The manufacturer declines any responsibility should these safety measures not be car-ried out.INSTALLATIONWARNING!Refer to "Safety information" chapter.The built-in unit must meet the stability requirements of DIN 68930.38 Electrical connection |
Related manuals for AEG KS8100001M
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine