AEG ProLine EH300M User Manual

Also see for EEB355020M: User manual User manual

6.3 Setting a heating function1. Turn the knob for the heating functions toselect a heating function.2. Turn the control knob to select thetemperature.3. When the cooking ends, turn the knobs tothe off position to turn off the appliance.6.4 Setting the function: True FanCooking PLUSThis function increases humidity duringcooking.WARNING!Risk of burns and damage to theappliance.1. Make sure that the appliance is cold.2. Fill the cavity embossment with tap water.The maximum capacity of the cavityembossment is 250 ml. Do not refill thecavity embossment during cooking orwhen the appliance is hot.3. Set the function: .4. Turn the control knob to set temperature.5. Preheat the empty appliance for 10 min tocreate humidity.6. Place the food inside the appliance. Donot open the oven door during cooking.7. Turn the knob for the heating functions tothe off position to turn off the appliance.8. After the function ends, carefully open thedoor. Released humidity can causeburns.9. Make sure that the appliance is cold.Remove the remaining water from thecavity embossment.7. ADDITIONAL FUNCTIONS7.1 Cooling fanWhen the appliance operates, the cooling fanturns on automatically to keep the surfaces ofthe appliance cool. If you turn off theappliance, the cooling fan can continue tooperate until the appliance cools down.8. CLOCK FUNCTIONS8.1 Clock functions tableTime of DayTo set, change or check the time of day.DurationTo set how long the appliance works.Minute MinderTo set a countdown. This function has no ef‐fect on the operation of the appliance. Youcan set this function at any time, also whenthe appliance is off.8.2 Setting: Time of Day1. - press repeatedly to change the timeof day. - flashes.2. , - press to set the time.After approximately 5 sec, the flashing stopsand the display shows the time.- flashes when you connect the applianceto the electrical supply, when there was apower cut or when the timer is not set. ,- press to set the time.10 ENGLISH