AEG ProLine EH300M User Manual

Also see for EEB355020M: User manual User manual

• WARNING: The appliance and its accessible parts becomehot during use. Care should be taken to avoid touchingheating elements or the surface of the appliance cavity.• Always use oven gloves to remove or insert accessories orovenware.• To remove the shelf supports first pull the front of the shelfsupport and then the rear end away from the side walls.Install the shelf supports in the opposite sequence.• Do not use a steam cleaner to clean the appliance.• Do not use harsh abrasive cleaners or sharp metal scrapersto clean the glass door since they can scratch the surface,which may result in shattering of the glass.2. SAFETY INSTRUCTIONS2.1 InstallationWARNING!Only a qualified person must install thisappliance.• Remove all the packaging.• Do not install or use a damagedappliance.• Follow the installation instructionsavailable on our website.• Always take care when moving theappliance as it is heavy. Always use safetygloves and enclosed footwear.• Do not pull the appliance by the handle.• Install the appliance in a safe and suitableplace that meets installation requirements.• The kitchen cabinet and the recess musthave suitable dimensions.• Keep the minimum distance from otherappliances and units.• Before mounting the appliance, check ifthe appliance door opens without restraint.• Parts of the appliance carry current. Closethe appliance with furniture to preventtouching the dangerous parts.• The appliance is equipped with an electriccooling system. It must be operated withthe electric power supply.2.2 Electrical connectionWARNING!Risk of fire and electric shock.• All electrical connections should be madeby a qualified electrician.• The appliance must be earthed.• Make sure that the parameters on therating plate are compatible with theelectrical ratings of the mains powersupply.• Always use a correctly installedshockproof socket.• Do not use multi-plug adapters andextension cables.• Make sure not to cause damage to themains plug and to the mains cable. Shouldthe mains cable need to be replaced, thismust be carried out by our AuthorisedService Centre.• Do not let mains cables touch or comenear the appliance door or the niche belowthe appliance, especially when it operatesor the door is hot.• The shock protection of live and insulatedparts must be fastened in such a way thatit cannot be removed without tools.• Connect the mains plug to the mainssocket only at the end of the installation.Make sure that there is access to themains plug after the installation.ENGLISH 5