AEG S53400CSS0 User Manual

Problem Possible cause SolutionThe temperature in theappliance is too low.The Temperature regulator maybe set incorrectly.Set a higher temperature.The temperature in theappliance is too high.The Temperature regulator maybe set incorrectly.Set a lower temperature.The door is not closed correctly. Refer to "Closing the door".The product temperature is toohigh.Let the product temperature de-crease to room temperature be-fore storage.Many products are stored at thesame time.Store less products at the sametime.The temperature in the re-frigeration is too high.There is no cold air circulation inthe appliance.Make sure that there is cold aircirculation in the appliance.The temperature in thefreezer is too high.Products are too near to eachother.Store products so that there iscold air circulation.The appliance does notoperate.The appliance is switched off. Switch on the appliance.The mains plug is not connectedto the mains socket correctly.Connect the mains plug to themains socket correctly.The appliance has no power.There is no voltage in the mainssocket.Connect a different electrical ap-pliance to the mains socket. Con-tact a qualified electrician.The lamp does not work. The lamp is in stand-by. Close and open the door.The lamp is defective. Refer to "Replacing the lamp".If your appliance is still not working properly after making the above checks, contact theAfter Sales Centre.Replacing the lamp1. Disconnect the appliance.2. Push the movable part to unhook thelamp cover (1).3. Remove the lamp cover (2).4. Replace the lamp with one of the samepower and specifically designed for do-mestic appliances only.5. Install the lamp cover.6. Connect the appliance.7. Open the door. Make sure that the lamp comes on.Closing the door1. Clean the door gaskets.2. If necessary, adjust the door. Refer to "Installation".1 214 What to do if…