AEG S53400CSS0 User Manual

11. Unscrew the upper hinge pivot (t1) andplace it on the opposite side.12. Fit the upper door on the upper doorpivot.13. Re-insert the upper door on the middlehinge pivot (m5) slightly tilting bothdoors.14. Re-screw the middle hinge (m2). Do notforget the plastic spacer (m1).15. Remove the covers (h1). Remove thecover pins (h2).16. Unscrew the handles (h3) and fix themon the opposite side.17. Re-insert the cover pins (h2) on the op-posite side.Do a final check to make sure that:• All screws are tightened.• The magnetic seal adheres to the cabinet.• The door opens and closes correctly.If the ambient temperature is cold (i.e. inWinter), the gasket may not fit perfectly tothe cabinet. In that case, wait for the natural fitting of the gasket.In case you do not want to carry out the above mentioned operations, contact the nearestAfter Sales Service Force. The After Sales Service specialist will carry out the reversibility ofthe doors at your cost.ENVIRONMENTAL CONCERNSThe symbol on the product or on its packaging indicates that this product may not betreated as household waste. Instead it should be taken to the appropriate collection pointfor the recycling of electrical and electronic equipment. By ensuring this product isdisposed of correctly, you will help prevent potential negative consequences for theenvironment and human health, which could otherwise be caused by inappropriate wastehandling of this product. For more detailed information about recycling of this product,please contact your local council, your household waste disposal service or the shop whereyou purchased the product.t1h1h2h3Environmental concerns 19