AEG S53420CNX2 User Manual
            | |
ClimateclassAmbient temperatureN +16°C to + 32°CST +16°C to + 38°CT +16°C to + 43°C7.2 Electrical ConnectionCAUTION!Any electrical work requiredto install this applianceshould be carried out by aqualified electrician orcompetent person.WARNING!This appliance must beearthed.The manufacturer declinesany liability should thesesafety measures not beobserved.The wires in the mains lead are colouredin accordance with the following code:A BCDE• A - green and yellow: Earth• C - brown: Live• D - blue: NeutralAs the colours of the wires in the mainslead of this appliance may notcorrespond with the coloured markingsidentifying the terminals in your plug,proceed as follows:1. Connect the wire coloured green andyellow to the terminal marked eitherwith the letter “E“ or by the earthsymbol or coloured green andyellow.2. Connect the wire coloured blue tothe terminal either marked with theletter “N“ or coloured black.3. Connect the wire coloured brown tothe terminal either marked with the“L“ or coloured red.4. Check that no cut, or stray strands ofwire is present and the cord clamp(E) is secure over the outer sheath.Make sure the electricity supplyvoltage is the same as that indicatedon the appliance rating plate.5. Switch on the appliance.The appliance is supplied with a 13 ampfuse (B). In the event of having to changethe fuse in the plug supplied, a 13 ampASTA approved (BS 1362) fuse must beused.WARNING!A cut off plug inserted into a13 amp socket is a serioussafety (shock) hazard. Ensurethat it is disposed of safely.7.3 Installation of theappliance and door reversalPlease refer to separateinstructions on installation(ventilation requirements,levelling) and door reversal.8. TECHNICAL INFORMATION8.1 Technical dataHeight 1845 mmWidth 595 mmDepth 642 mmRising time 18 hVoltage 230 - 240 Vwww.aeg.com10 |
Related manuals for AEG S53420CNW2
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine