AEG S53420CNX2 User Manual

Contents

Problem Possible cause SolutionWater flows inside the re-frigerator.The water outlet is clog-ged.Clean the water outlet.Food products prevent thatwater flows into the watercollector.Make sure that food productsdo not touch the rear plate.Water flows on the floor. The melting water outlet isnot connected to the evap-orative tray above the com-pressor.Attach the melting water out-let to the evaporative tray.Temperature cannot be set. The FROSTMATIC orCOOLMATIC function isswitched on.Switch off FROSTMATIC orCOOLMATIC manually, or waituntil the function resets auto-matically to set the tempera-ture. Refer to "FROSTMATICor COOLMATIC function".The temperature in the ap-pliance is too low/too high.The temperature regulatoris not set correctly.Set a higher/lower tempera-ture.The food products' temper-ature is too high.Let the food products temper-ature decrease to room tem-perature before storage.Many food products arestored at the same time.Store less food products at thesame time.The FROSTMATIC functionis switched on.Refer to "FROSTMATIC func-tion".If the advice does not leadto the desired result, contactthe nearest AuthorisedService Centre.6.2 Replacing the lampThe appliance is equipped with a longlifeLED interior light.Only service is allowed to replace thelighting device. Contact your AuthorisedService Centre.7. INSTALLATIONWARNING!Refer to Safety chapters.7.1 PositioningThis appliance can be installed in a dry,well ventilated indoor where the ambienttemperature corresponds to the climateclass indicated on the rating plate of theappliance:ClimateclassAmbient temperatureSN +10°C to + 32°CENGLISH 9

/ 12

Related manuals for AEG S53420CNW2