Micro-Ohmmeter Model 6250 49NOTE: The Set-up window remains open. You may now select anotheroption to download (e.g. Adobe® Reader), or close the window.17. Restart your computer, then connect the instrument to the USB porton the computer.18. Once connected, the Found New Hardware dialog box will appear.Windows will complete the driver installation process automatically.Shortcuts for DataView® and each instrument control panel selected duringthe installation process have been added to your desktop.NOTE: If you connected your instrument to the computer before installingthe software and drivers, you may need to use the Add/Remove Hard-ware utility to remove the instrument driver before repeating the process.6.2 Connecting the Instrument to your ComputerThe Model 6250 is supplied with a serial cable (Cat. #2119.45) necessaryfor connecting the instrument to the computer.To connect the instrument to your computer, connect one end of the serialcable to the communications port on the Model 6250 and the other end tothe port on the computer.6.3 Establishing Communication to the Instrument1. Double-click the Micro-ohmmeter Icon that was created duringsoftware installation, located on the desktop, to open the Micro-ohmmeter Control Panel.2. From the main menu, go to Instrument > Connect to open theConnection dialog box.Figure 6-4www. .com information@itm.com1.800.561.8187