AEMC 6417 User Manual
Also see for 6417: Service/Calibration ManualQuick start user guideUser manualUser manual
                                                            | |
Contents
|
Clamp-on Ground Resistance Tester Model 6417 174. SET-UPTurn the rotary switch to the SET-UP position.4.1 Menu ItemsThe SET-UP position gives access to the following options to set user definedparameters for instrument configuration:No. Function1 Erases stored measurements.2 Enables/disables the buzzer.3 Enables/disables Auto Power OFF4 Sets the impedance alarm threshold (W).5 Sets the voltage alarm threshold (V).6 Sets the current alarm threshold (I).7 Sets the date.8 Sets the time.9 Selects the Standard or Advanced operating mode.10 Selects the test frequency for the impedance.11 Enables/disables the AUTO-HOLD mode.12 Displays the version number.13 Not used.4.2 SET-UP Menu DisplaysThe 12 accessible menus (listedabove) are clearly identified by theirtitle and number, as shown in theexample in Figure 4-1 (menu #5)which displays the voltage alarmthreshold adjustment (AL. V).Figure 4-1www. GlobalTestSupply .comFind Quality Products Online at: sales@GlobalTestSupply.com |
Related manuals for AEMC 6417
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine