20 Power Quality Analyzer Model 8230CHAPTER 4OPERATIONNOTE: Charge the instrument fully before use.Press the ON/OFF button to turn the unit ON. The startup screen appearsindicating the instrument’s software version and serial number.If there is no AC power supply, the instrument operates on batteries. The instru-ment’s batteries are charged when it is connected to a 120/240; 60/50Hz line.4.1 Instrument Configuration (Set-up mode)NOTE: All configurations are available through the DataView® software.NOTE: The instrument must be configured the first time it is used and then when-ever necessary, should your needs change. The configuration is saved when theinstrument is turned OFF.Press the configuration button to configure the instrument.DATE / TIMECONTRAST / BRIGHTNESSCOLORSCALCULATION METHODELECTRICAL HOOKUPCURRENT SENSORSRECORDINGALARMSCLEAR MEMORYABOUT02/25/06FR EN DE ES IT POFigure 4-1• Set the display language by using the ◄ and ► buttons.• The parameter that is ready to be configured will be highlighted in yellow. Tomove to a different parameter, use the ▲ and ▼ buttons.