Power Quality Analyzer Model 8230 53CHAPTER 6DATAVIEW® SOFTWARE6.1 Installing DataView®DO NOT CONNECT THE INSTRUMENT TO THE PC BEFORE INSTALLING THESOFTWARE AND DRIVERS.Minimum Computer Requirements:• Windows XP / Windows Vista & Windows 7/8 (32/64 bit)• 256MB of RAM for Windows XP1GB of RAM for Windows Vista & Windows 7/8 (32 bit)2GB or RAM for Windows Vista & Windows 7/8 (64 bit)• 80MB of hard disk space (200MB recommended)• USB portWindows is a registered trademark of Microsoft Corporation in the United States and other countries.NOTE: When installing, the user must have Administrative access rightsduring the installation. The users access rights can be changed after theinstallation is complete.DataView® must be reinstalled for each user in a multi-user system.USB Flash Drive Install1. Insert the USB stick into an available USB port (wait for driver to be installed).2. If Autorun is enabled then an AutoPlay window should appear as shown.
