Aaeon ECM-5716 Series User Manual

Contents

Aaeon ECM-5716 Series User Manual Manual pdf 108 page image

ECM-5716 SeriesECM-5716 Series User’s Manual 956.2.12 Invalid EISA ConfigurationPLEASE RUN EISA CONFIGURATION UTILITYThe non-volatile memory containing EISA configuration information was programmedincorrectly or has become corrupt. Re-run EISA configuration utility to correctly programthe memory.NOTE: When this error appears, the system will boot in ISA mode, which allows you to run the EISAConfiguration Utility.6.2.13 KEYBOARD ERROR OR NO KEYBOARD PRESENTCannot initialize the keyboard. Make sure the keyboard is attached correctly and no keysare being pressed during the boot.If you are purposely configuring the system without a keyboard, set the error haltcondition in Setup to HALT ON ALL, BUT KEYBOARD. This will cause the BIOS toignore the missing keyboard and continue the boot.6.2.14 Memory Address Error at ...Indicates a memory address error at a specific location. You can use this location alongwith the memory map for your system to find and replace the bad memory chips.6.2.15 Memory parity Error at ...Indicates a memory parity error at a specific location. You can use this location alongwith the memory map for your system to find and replace the bad memory chips.6.2.16 MEMORY SIZE HAS CHANGED SINCE LAST BOOTMemory has been added or removed since the last boot. In EISA mode use ConfigurationUtility to reconfigure the memory configuration. In ISA mode enter Setup and enter thenew memory size in the memory fields.6.2.17 Memory Verify Error at ...Indicates an error verifying a value already written to memory. Use the location along withyour system's memory map to locate the bad chip.6.2.18 OFFENDING ADDRESS NOT FOUNDThis message is used in conjunction with the I/O CHANNEL CHECK and RAM PARITYERROR messages when the segment that has caused the problem cannot be isolated.6.2.19 OFFENDING SEGMENT:This message is used in conjunction with the I/O CHANNEL CHECK and RAM PARITYERROR messages when the segment that has caused the problem has been isolated.