User’s Manual64 ECM-5716 Series User’s Manual4.5.12 Supervisor / User Password SettingYou can set either supervisor or user password, or both of them. The differences betweenare:supervisor password: can enter and change the options of the setup menus.user password: just can only enter but do not have the right to change the options of thesetup menus. When you select this function, the following message will appear at thecenter of the screen to assist you in creating a password.ENTER PASSWORD:Type the password, up to eight characters in length, and press . The passwordtyped now will clear any previously entered password from CMOS memory. You will beasked to confirm the password. Type the password again and press . You mayalso press to abort the selection and not enter a password. To disable a password,just press when you are prompted to enter the password. A message will confirmthe password will be disabled. Once the password is disabled, the system will boot andyou can enter Setup freely.PASSWORD DISABLED.
