Supplementary features76 Aastra 622deud-1585/1.0 – R3.0 – 04.2013Setting functions by remote controlThis section explains how you can alter your phone’s settings even if you are notdirectly at your phone.You are not at your desk and want to set various functions on your phone from a dif-ferent phone.You can activate/deactivate many of your phone's functions by remote control from adifferent phone.The remote control is initiated using a special function code. You can then enter thefunction commands and function codes. Using remote control from a third-party phone:1. Enter function code #06.2. Enter your phone number.3. Enter your PIN.4. Enter the function code for activating/deactivating the function you want.Press the Call key.➔Acknowledgement tone sounds; function is activated/deactivated.Note:The default PIN setting "0000" is not accepted. First change the PIN asdescribed in chapter "Changing the User PIN", page 90 or use the functioncode *47 (see "User’s Guide Function Codes" on the Aastra DocFinder). If youhave forgotten your PIN, your system administrator can reset it to the defaultsetting.www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
