Model 57i CT IP Phone User Guide 45SoftkeysSoftkeys as SprecodeYou can set a softkey to automatically activate specific services offered bythe server by setting a softkey to "sprecode". For example, if the sprecodevalue of *82 is configured, then by pressing the softkey, *82 automaticallyactivates a service provided by the server. The value you enter for this fieldis dependent on the services provided by the server. Contact your systemadministrator for information about available services.Setting a Sprecode SoftkeyUse the following procedure to configure a sprecode softkey on the 57i CTphone.1. Click on Operation->Softkeys and XML.2. Click on the Bottom tab or the Top tab.3. Select from "Key 1" through "Key 20" on the bottom tab..orSelect from "Key 1" through "Key 10" on the top tab.4. In the "Type" field, select Sprecode.5. In the "Label" field, enter a label to display on the IP phone for this soft-key.6. In the "Value" field, enter the appropriate value for accessing specificservices from the server.Note: For values to enter in this field, contact your system administrator.Aastra Web UI
