AlarmAastra 632d 119eud-1586/1.0 – R3.0 – 04.2013Configuring the no-movement, man-down andescape alarmConfiguring the no-movement, man-down and escape alarmYou want to activate/deactivate the man-down, no-movement or escape alarm.You can activate/deactivate the man-down, no-movement or escape alarm inde-pendently of each other and set the Dete4ction duration und Sensitivity (see chapter"Sensor alarm types", page 114).Press the navigation key to the right or the Menu softkey.SettingsScroll to Settings and press the Select softkey.Sensor alarmScroll to Sensor alarm and press the Select softkey.Man-down alarm Activating/deactivating man-down alarm:1. Scroll to Man-down alarm and press the Select softkey.2. Scroll to Enable and press the Select softkey.3. Scroll to Detection duration and set the duration for how long an alarm situ-ation may occur until the pre-alarm is triggered.➔Alarm is activated/deactivated.No-movement alarm Activating/deactivating no-movement alarm:1. Scroll to No-movement alarm and press the Select softkey.2. Scroll to Enable and press the Select softkey.3. Scroll to Detection duration and set the duration for how long an alarm situ-ation may occur until the pre-alarm is triggered.4. Scroll to Sensitivity and press the Select softkey.5. Select the sensitivity level and press the Select softkey.➔Alarm is activated/deactivated.Escape alarm Activating/deactivating escape alarm:1. Scroll to Escape alarm and press the Select softkey.2. Scroll to Enable and press the Select softkey.3. Scroll to Detection duration and set the duration for how long an alarm situ-ation may occur until the pre-alarm is triggered.4. Scroll to Sensitivity and press the Select softkey.5. Select the sensitivity level and press the Select softkey.➔Alarm is activated/deactivated.www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46