Alarm122 Aastra 632deud-1586/1.0 – R3.0 – 04.2013Setting the server alarm signallingWhen the server alarms are activated in the system, you can select from the alarm sig-nalling as follows: Vibracall, Progressive ring tone, Suppress ring tone (see chapter "Set-ting the server alarm", page 82).Hands-free in the event of an alarmYou can configure the setting so the alarm trigger occurs in hands-free or handsetmode. This setting is then also valid for the emergency call using the SOS key.Triggering an alarm manuallyYou are in an emergency situation and want to trigger an alarm.By pressing the SOS key on the top of the housing you can trigger an alarm, providingthe phone is switched on.For your safetyRange alarmThe phone can only send the alarm messages if it is within the radio area. So it isimportant to activate the Range alarm so that you are notified acoustically by thephone if you are about to leave the radio area (see chapter "Activating range alarmand system busy beep", page 82).Note:Your settings for Vibracall and Suppress ring tone can be overruled by the alarmserver.Press the SOS key on the top of the housing.➔Alarm is triggered.Note:The alarm is triggered even if the keypad is locked.www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
