Team Functions98MenuCard “Prog. team key”g Long press the team key, then select …1 Modify text: The text currently assigned to the key is shown on the display of yourtelephone. To change the text, press O. Delete the existing text with the Ckey and enter new text, if required. Press O and confirm this with Save. If youdelete the text, only the key’s call number will be displayed.2 Call signalling: Specify whether call signalling to this key is to beOptical & acoustic, Optical only or Acoustic after delay. If you select Acoustic afterdelay, specify the number of seconds after which your telephone is to ring.3 Call protect: Switch call protection On or Off for all calls, for internal calls only, or forexternal calls only. If call protection has been activated, this team key will onlyindicate calls by means of a visual signal, even if they are made from a direct-call key.4 Ring tone: You can set the Volume and Melody for different types of incoming calls(1 External calls, 2 Internal calls, 3 VIP call, 4 Door call) for each team key. Proceedas described in the section “2 Ring Tone” on page 113.5 Call wait. prot.: While you are making a call, other calls for the call number of thisteam key are not signalled by a call waiting tone (but at the team keys of other ter-minals unless call waiting protection was programmed there). Use the On / Offoptions to switch the call waiting protection function on or off.6 Lists: Define if for the call number of this team key the caller lists (missed calls andaccepted calls) and the redial list are recorded. Use On/Off to activate/deactivate thelists for this team key.Direct-call KeyWhen a direct-call key is long pressed, no MenuCard is displayed. A direct-call key isconfigured exclusively via the Configurator of the OpenCom 100 / Aastra 800 Webconsole.
