Ascotel® IntelliGate® 150/300 as of I7.9Configuration 145syd-0210/1.7 – I7.9 – 12.2009Note:It is advisable not to keep the remote access authorization permanentlyactivated. This ensures that the PBX cannot be manipulated from aremote location by unauthorized persons.5. 4. 2 */# procedure for remote accessTab. 74 */# procedure for remote access authorizationWhen remote access is enabled using procedure *754, access will automatically bebarred again once the remote configuration process has been completed. It is pos-sible to bar access manually using #754 before a remote configuration process hasbeen initiated.Remote access can be enabled permanently using the procedure *753. To bar ac-cess, the authorized user must enter the procedure #753 manually.The enabling or barring of remote access authorization using the */# procedure issignalled in each case by an acknowledgement tone.Remote access authorization can also be enabled or barred in the AIMS Configura-tion Manager or with the System Assistant function on the Office 45, if the relevantauthorization has been given.Note:In a QSIG network it is important to make sure that the authorization tochange the remote access is also denied to unauthorized PISN users. Oth-erwise a PISN user would be able to use an abbreviated dialling numberdefined for the destination PINX and containing the appropriate proce-dure to change the remote access authorization to the destination PINX.Ascotel® IntelliGate® Net:In an AIN the remote access of all the nodes depends on the setting in theMaster. If remote access is enabled in the Master, both the AIN configura-tion and the offline configuration of the satellites are enabled.Remote access via an external dial-up connection to the AIN is alsosecured and hast to be explicitly enabled (see "Enabling / disabling thedial-up connection to the AIN", page 185). This is irrespective of whetherdial-up access is via a satellite or directly to the Master.Enable / bar a one-off remote access *754 / #754Enable / bar a permanent remote access *753 / #753
