TD 92474EN31 October 2013 / Ver. HUser ManualAastra DT69x DECT Telephones225. Calling5.1 Open the Call ListThe 25 last received, dialled or missed calls are stored in a call list.Press to open the call list. Step with and select one of the numbers.If a number occurs more than once the last time stamp, together with the total number ofoccurrences, is shown. Press the soft key "Call" to dial.The call list can also be accessed via the Calls info menu, see 7.2 Calls on page 35.5.2 Incoming CallThe flashing LED, accompanied by a ring signal and/or a vibrating telephone, give you noticeof a call. Ring signal and vibrator can be disabled, see 7.9.1 Sound and Alert Settings onpage 47.The calling party’s telephone number or name is shown. The name will be shown if thecalling party’s telephone number is stored in Contacts.Other answering methods can also be set in the Settings menu, see 4.8 Settings on page 19.The answering methods are; Automatically and Loudspeaking.When “Automatically” is enabled, all incoming calls will be connected automatically.5.2.1 Answer a CallWhen the signal sounds press to answer the call, or press the Soft key to answerthe call in loudspeaking mode. The name/number of the calling party is displayed if callingline information is available.The user also has the option of declining, but still acknowledging the receipt of the call, bysending a predefined text message to the caller. See 5.7 Declining a Call with a PredefinedMessage on page 29.5.2.2 End a CallA press on ends the call. The duration of the call is shown in the display. The totaltime of the call can also be retrieved from the Calls menu > Call time.5.3 Outgoing Call5.3.1 Pre-DialEnter the number and press to get the line. The number is shown on the display whiledialling. If required, press "Clear" to erase the number. By using the navigation key it ispossible to step and add or delete a digit in a number.An international number can be dialled from the handset by entering a + character followedby the country code and local number. To enter the + character, long press the 0 key untilthe character is shown in the display.NOTE: The + character cannot be entered and international numbers cannot de dialled in thefollowing circumstances: