Aastra DT69x DECT User Manual

Also see for DT690: Quick reference guide User guide User manual User guide User guide

Contents

Aastra DT69x DECT User Manual Manual pdf 32 page image

TD 92474EN31 October 2013 / Ver. HUser ManualAastra DT69x DECT Telephones272 Select "End Call"2.3 Press "Select". This will end the current call and the previous call is resumed.5.4.9 Transfer a CallPrerequisite, a new call has been started during conversation, see 5.4.6 Start a New Callduring Conversation on page 26.When a caller has two ongoing calls, he/she can transfer the first call with the second call.1 Press "More".2 Select "Transfer". NOTE: this option is only available if it has been set in the PDM orCPDM3..3 Press "Select". This will connect the first caller with the person you want to transferthe call to.5.4.10 Transfer to new CallAn ongoing call can be transferred to a new number. When the new call is established, thecaller that initiated the transfer will be disconnected.1 Press "More" during the call2 Select "Transf. to new". NOTE: This option is only visible if the parameters "New call"and "Transfer" are defined in the PDM or CPDM3.3 Press "Select".4 Dial the number to the person you want to transfer the call to.5 Press to transfer the call.5.4.11 Conference CallPrerequisite, a new call has been started during conversation, see 5.4.6 Start a New Callduring Conversation on page 26.By initiating a conference call, an conversation can be made between several participantssimultaneously.To connect a conference call, do as follows:1 Press "More".2 Select "Conference". NOTE: this option is only available if it has been set in the PDM orCPDM3.3 Press "Select".The person initiating the conference call is the conference leader, and the other areparticipant members of the conference call.5.4.12 Call BackTo enable call back when a call is made to a busy telephone, and to be altered when thetelephone is free, do as follows:1 Press "More" during the call.2 Select "Call back". NOTE: this option is only available if it has been set in the PDM orCPDM3.3 Press "Select".4 Press and wait until the telephone alerts.