Aastra OpenCom 100 Quick Reference Manual

Also see for OpenCom 510: User guide Mounting and Commissioning User Guide Quick reference guide Short installation guide User guide

Aastra OpenCom 100 Quick Reference Manual Manual pdf 31 page image

29PIN DiallingThis feature cannot be used with a SIP terminal.H#46 Z (internal call no. of the telephone used, e. g. “102”) *Z (your user PIN) # Z (destination no.)You switch the telephone to a user group determined by the system administrator forthe next call. Switching the user group involves different authorisations (e. g. interna-tional dialling authorisation) and possibly other features (e. g. for billing andrecording connection data of private calls). Please contact your system administratorfor information on the system configuration and the designated application for PINdialling.First you enter the internal call number of the telephone you wish to make a call fromand then your user PIN. Then you can dial the desired call number.NotePIN dialling is available on any terminal in a user group with this authorisation acti-vated. The call number dialled using PIN dialling is not saved in any redial list, neitheron the terminal used, nor on one’s own terminal.Switch authorisationThis feature cannot be used with a SIP terminal.on: H*52* Z (internal tel. no.) #off: H#52* Z (internal tel. no.) #You switch another terminal to a user group defined by the system administrator.Switching the user group means different authorisations, e. g. international diallingauthorisation. The switch only applies to the next call made from this terminal. Pleasecontact your system administrator for information on altered authorisations whenswitching the user group. Enter the internal call number of the terminal whoseauthorisation is to be switched.NoteWhen the terminal to be switched is currently in the call state, the authorisationswitch is carried out after the call is completed. If the next call is not begun within60 seconds, the authorisation switch expires automatically.