Abbott Afinion 2 User Manual

Abbott Afinion 2 User Manual Manual pdf 34 page image

34 | USAFINION™ 2 User ManualGallery of IconsOther symbols and signsOther symbols, signs and abbreviations that may appear during operation of the Afinion 2 Analyzer are explained below. These symbols or signs are only inform-ative and can not be activated like the buttons.Symbol Meaning Appears when?Wait! Hour-glass icon that appears in the start-up procedure.Information code Icon used along with a code number [#] that corresponds to code specific information messages [#](see “Information codes and troubleshooting”).Operator ID Icon illustrates the operator ID.Patient ID Icon illustrates the patient ID.Control ID Icon illustrates the control ID.Connected The instrument is connected to the LIS/HIS/EMR server. When no symbol, the instrument is not connected to theLIS/HIS/EMR server.Quality control pass Control result is within acceptable range.Quality control failed Control result is outside acceptable range.Result is aboveacceptable range The displayed control result is above acceptable range.Result is belowacceptable range The displayed control result is below acceptable range.C Control The letter C will appear on the screen when the control mode is selected.O-ID Operator ID Abbreviation used in the patient and control records.P-ID Patient ID Abbreviation used in the patient records.C-ID Control ID Abbreviation used in the control records.RUN# Run number Abbreviation used in the patient and control records for the run number of the analysis. This numbering is reset eachday at midnight.LOT# Lot number Abbreviation used in the patient and control records for the lot number of the test cartridge.USER User Operator with user privileges.SUPERVISOR Supervisor Operator with supervisor privileges.

/ 36

Related manuals for Abbott Afinion 2