AbleNet Quick Talker 1 Quick Start Manual

AbleNet Quick Talker 1 Quick Start Manual Manual pdf 1 page image

Insert Battery and Turn On1 Record A Message2Erase A MessageLow Battery Indicator5Contact & Warranty InfoPlaying A Message3Erase A Message4Quickstart Guide: Quick Talker ™ 11. Remove phillips screw andbattery door.2. Insert one 9-V battery andre-attach battery door andphillips screw.3. Slide power switch to on.1. Press record button andthe visual feedback lightwill turn red.2. Touch the activation area.When you hear the auditory beepand the visual feedback lightstarts to blink, begin recording yourmessage into the microphone.3. When you are finished recording,press the record button again.1. To erase a message either record a new message over the existing message or hold therecord button for three seconds. You will hear an auditory beep when the message hasbeen erased.1. Touch the activation area to play message.2. Adjust volume up or down as needed.3. You will see the visual feedback light turn on when the activation surface is touchedand message plays.Power ON/OFFBattery DoorVisual Feedback LightMicrophoneActivation AreaWarranty/Repair/Return InformationAbleNet offers a limited two-year warranty on QuickTalker communication products. For fullwarranty details, visit www.ablenetinc.com.For more information on AbleNet products and services.AbleNet, IncMinneapolis/St Paul, MN800-322-0956 (US & Canada) / www.ablenetinc.com© 2012 AbleNet, Inc., All Rights Reserved.PN 98000006 Rev. B (10/2012)Record ButtonVolumeThe following are indicators of a low battery and the battery should be replaced.1. Immediately after a message plays, the visual feedback light blinks red three times.2. A message begins to play, but stops before completely playing and the visual feedbacklight blinks red three times after the message stops playing.

/ 4

Related manuals for AbleNet Quick Talker 1